Takeuchi TL140 TL150 TL240 TL250 Sprockets

SKU: 881160110
Weight: 45 lbs
Buy replacement drive sprockets for your Takeuchi TL 140, Takeuchi TL 150, TL 10, TL 12, TL 240, TL 250 (double check your serial number, this is designed to replace Takeuchi Part: 08811-60110)
Make: Takeuchi
Price: $179.00
Takeuchi TL150 Sprockets 881160110
Takeuchi TL140 TL150 TL240 TL250 Sprockets
Product Details

Takeuchi TL 150 Replacement Steel Drive Sprocket Gear

This is the premium aftermarket replacement drive sprocket for the following models:

  • Takeuchi TL 10
  • Takeuchi TL 12 (Note this does not fit the TL12-V2 Model)
  • Takeuchi TL 140 (serial numbers greater than 21402001)
  • Takeuchi TL 150
  • Takeuchi TL 240
  • Takeuchi TL 250
  • Mustang MTL 20
  • Mustang 320
  • Mustang MTL 25
  • Mustang 325

This sprocket is also interchangeable with the Gehl and Mustang track loaders. Please submit your serial number at the time you place your order so we can verify fitment prior to shipping. Rubber tracks and sprockets are designed to wear together so we recommended changing them at the same time to maximize the lifespan.

08811-60110 Sprocket specifications:

  • 14 Teeth
  • 9 Bolt Holes
  • Inside Diameter: 9 1/2 Inches
  • Outside Diameter: 18 1/2 Inches
  • Width at Base of Tooth: 1 7/8 Inches


Alternate Part Number: Takeuchi dealer part number: 08811-60110.
Gehl dealer part number: 181147
Alternate Model Number:
The 08811-60110 sprocket is known to fit the the Takeuchi TL140 if your serial number is higher than 21402001.
Takeuchi: TL10, TL12, TL 150, TL240, and TL250.

Alternate Part: The 882160010 part is an option for your TL140 older series with serial numbers below 21402001.

Takeuchi TL150 sprocket locationThe Takeuchi TL150 drive sprocket is located at the top of the undercarriage to the rear of the machine. The sprocket bolts to the drive motor with nine bolts (hardware not included).

Takeuchi TL 150 Undercarriage Parts Listing

Sprocket 881160110
Bottom Roller 881130500
  Idler 881140300
  Front Roller 881131300
  Rubber Track MEPC-0805

Takeuchi TL 140 TL 150 Sprocket Options

There are two sprocket options on the Takeuchi track loaders. The difference is in the size of the mounting hole that goes over the drive motor. If you are in doubt just check the diameter of the mounting hole on your drive sprocket

All manufacturers, names, symbols and descriptions are used for customer reference needs only, and it is not implied that any parts or rubber tracks are original products of the manufacturer. All wear parts offered on the website are aftermarket products but are backed by a warranty.