Rubber Tracks for John Deere CT332

Weight: 542 lbs

Buy aftermarket replacement rubber tracks T254112 for John Deere compact track loaders online at Pentom Parts and save money on your maintenance and repair budget.

Price: $1,233.10
John Deere CT332 Tracks
Rubber Tracks for John Deere CT332
Product Details

John Deere CTL UndercarriageThis is the aftermarket replacement rubber track for several John Deere compact track loaders. The tread pattern shown above in the product image is the actual tread pattern you will receive. This is our staggered block tread pattern for maximum floatation in general use applications. The track is eighteen inches wide with fifty-six metal links designed to replace original John Deere part number: T254112.

This track is guaranteed to fit the following models:

  • John Deere 329D
  • John Deere CT 332
  • John Deere CT 333D
The John Deere CT332 comes with a few track size options so please verify before ordering. 

It is possible that your track is thirteen inches wide or it could have fifty-five metal links down the center. The links are the steel bars down the center of the track that the sprocket catches to turn the track.

The CT329D and 333D also have a sixteen inch wide option. 
The easiest thing to do is measure the width and count the steel bars down the center of your track and give us a call at 800-719-4160.

The same sprocket fits each of these track options. The sprocket we carry for the John Deere CT 332 can also be purchased online.

Other tread patterns may be available for your John Deere track loader. See the alternate options at the bottom of our page or please call if you have specific needs.

Alt. Part Number:

Alternate dealer part number: T254112. Size: 450x86x56 or 450x56x86
Alt. Part Style:
We stock staggered block tread, C-pad, and aggressive zig zag patterns.

This track comes with a standard one year pro-rated warranty against manufacturer defects. If sprockets are purchased and installed together with the tracks, we will extend the warranty an additional 6 months! *See our warranty for further details. Always consider changing your sprockets and any worn undercarriage parts when you change your tracks. Rubber tracks and sprockets are designed to wear together and changing sprockets at any other time would reduce the lifespan of both the track and the sprocket. Other worn parts can effect the tensioning of the track and can cause de-tracking and other wear issues.

Tread Patterns Commonly Available

Staggered Block Tread Pattern

The off-set block tread pattern is the most general purpose tread pattern for wide spread job site applications. Adequate traction with maximum floatation helps prevent damage to sensitive areas while still providing enough traction for typical job sites.

Zig Zag Tread Pattern

This tread pattern allows for maximum traction in a wide variety of applications including mud, snow, and slopes. The additional tread depth gives you more forward traction with just enough jagged zig zag edges to provide traction on a slide slope.

Offset C Pad Tread Pattern

The off-set C tread pattern is common among original equipment manufactures because it gives significant forward traction and grip as well as extra traction provided by the C shaped pads when operating across a slope, even though that is not suggested practice.


Please see our John Deere CT322 Parts section for all the available undercarriage options we stock. This track is known to replace original part numbers: T317183 and 372-5791.

All manufacturers, names, symbols and descriptions are used for customer reference needs only, and it is not implied that any parts or rubber tracks are original products of the manufacturer. All wear parts offered on the website are aftermarket products but are backed by a warranty.